Remote Control for Canon EOS 650D 550D 600D T3i T2i T1i X5 X4 5D Mark II 7D RC-5

Introduction
It can trigger the camera shutter release remotely from a distance. The compatible camera has a built-in infrared receiver for this remote trigger device.
It has been proved to be safe and reliable with the multi-brand cameras (see more details in the picture above), and works with all camera remote control modes (Quick-response, Delayed and Bulb).  Works from up to 8 meter (25 feet) away.

Contains
• Remote Control x1
• Lithium CR2025 battery (inside) x1

Suitable For

Canon
EOS 600D (Rebel T3i), 500D(Rebel T1i),  550D(Rebel T2i),  400D(Rebel XTi), EOS 350D(Rebel XT), EOS 450D(Rebel XSi),, EOS 30/33/30V,
EOS 50/55, EOS kissIII, EOS kissIIIL, EOS 100,
EOS 10, EOS 300V, EOS 300X, 300VQD, EOS 7D, 5D Mark II.
etc..
Use Means

1.For the first time use. please pull out the plastic separator at the battery holder.

2.Mount the camera on a tripod or place the camera on a stable, level surface.

3.Press the button and rotate main command dial until(delayed remote) or(quick response remote)is displayed in the control panel.

4.Aim the transmitter on the remote control at the infrared receiver on the camera (usually within +/-30 degree of the lens axis, from the left to the right and from the top to the bosom) and press the shutter-release button on the remote control (when using the remote outdoors,make sure that the subject is not backlit and that the line of site between the transmitter and the infraed receiver is not blocked by the lens or other obstacles).

5.How the camera focuses and shoots depends on the option selected camera's custom setting.For futher information,check your camera's manual.

6.Infrared cannot be seen by human eyes. So you will see no visible light from the LED on the front end of the remote control when operating.

7.Battery : CR2025.