RF-603 Wireless Trigger for nikon D3s D800 D700 D300S D3X etc.

Introduction

The brand new RF-603 is a remote shutter release as well as a multi-functional radio flash trigger which can synchronously trigger flashes and studio strobes. Through the transceiver based system each item can be used flexibly as trigger or receiver. Only 2 AAA batteries are required as power source for each item.

The 2.4GHz wireless frequency is suitable in most countries and guarantees high speed, distance and stability. Within capacious areas, the remote control distance may reach to 100m. The synchronization speed can reach to 1/320, depending on the situation it may reach to 1/250 or less.

A set consist of 2 equal transceivers. Both of them can be a receiver as well as transmitter. It can trigger 1 flash with one set, since one serves as trigger and one as receiver. You can also buy additional transceivers to trigger 2 or more flashes at the same time.

 

Function 1: As a Wireless Shutter Release 

 

1), Has the function of Auto-Focus, Continuous shooting, Long Exposure, Half-Way Pressing, Full-way Pressing
2), Press the buttom of transmitter to control camera.
3), Press the camera shutter bottom to contral camera.
4), If your camera doesn't have the hot shoe, you can use the related PC Sync Plug which can connect camera and receiver. 

 

Function 2: As a Wireless Flash Unit Trigger/receiver

 

1), Has the function of firing the flash speedlite,
Amount the transamitter into hot shoe of camera, connect the receiver with the flash speedlite, please half-way of shutter button to wake up the flashgun at the same time, the green signal light will be bright for some seconds, and then full press shutter button to fire the flashgun and take a picture. ( This " Wake up " function is only support the flashgun which having the sleep mode )

2),One transmitter/receiver can trigger more than 2 receivers at the same time, so you can trigger more than 2 flashes at the same time. You can buy extra receivers depends on your flashgun.

 

Function 3: As a Wireless Flash Unit Trigger

 

---Using the Flash PC Sync Cable, the transmitter can wirelessly synchronously trigger the off-camera flash(es) which is mounted on the receiver(s). At the same time, you still can use the camera hot shoe for another flash. 

---Compatible Flash Models: Same as Function 2

 

Function 4: As a Wireless Studio Flash Trigger

 

Using the Studio Flash Sync Cable, the transmitter can wirelessly synchronously trigger the Studio Flash(es). It is a good kit for studio photography. 

 

Features:

Type	FSK 2.4GHz wireless remote system
Transmitter Distance	100m
Channel	15 different channels and all channels
Release	Half-way press, full-way press
Transmitter Port	PC Sync
Receiver Port	PC Sync, 2.5mm for shutter release
Time of shooting	Up to 20000 times
Receiver stand-by time	Up to 45 hours (using AAA batteries)
Dimensions	37mm x 30mm x 81.5mm
Weight	150g

Contains:
1 x Transmitter
1 x Receiver
1 x Shutter Connecting Cable
1 x Instruction in Chinese and English